UNS S31803 Duplex Stainless Steel Round Bar
UNS S31803 Duplex Stainless Steel Round Bar manufacturer, suppliers and stockists in S22253 round bar and S31500 round bar.
Being an expert in manufacturer, suppliers and stockists UNS S31803 Duplex Stainless Steel Round Bar. Ensure the best quality, which is in compliance with international quality standards as our in-house manufacturer UNS S31803 Duplex Stainless Steel Round Bar unit is equipped with advanced machinery to check the quality. The primary feature of this UNS S31803 Duplex Stainless Steel Round Bar is it has very longer service life duration with operational convenience and safety.
2205 STAINLESS STEEL ROUND BARS 2205STAINLESS STEEL SQUARE BARS 2205 STAINLESS STEEL HEX BARS 2205 STAINLESS STEEL FLAT BARS
2205 Duplex Stainless Steel Round Bar Chemical Composition
| Min. % | Max % |
|
| Carbon | 0 | 0.03 |
| Silicon | 0 | 1.00 |
| Manganese | 0 | 2.00 |
| Nickel | 4.50 | 6.50 |
| Chromium | 21.00 | 23.00 |
| Molybdenum | 2.50 | 3.50 |
| Nitrogen | 0.08 | 0.20 |
| Phosphorous | 0 | 0.03 |
| Sulphur | 0 | 0.02 |
2205 Duplex Stainless Steel Round Bar Physical Properties
| Temsile Strength Mpa | 650 – 900 |
| Yield Strength Mpa | 570 |
| Elongation in 50mm % | 30 |
| Impact Charpy J | 130 |
| Hardness | HB | 235 |
| Rc | 23 |
2205 Duplex Stainless Steel Round Bar Mechanical Properties
| Temsile Strength Mpa Min. | 620 |
| 0.2% Yield Strength Mpa Min. | 448 |
| Elongation in 50mm % Min. | 25 |
| Hardness HB Max | 290 |
» 2205 Duplex Stainless Steel Round Bar uses in Oil and Gas Pipeline
»2205 Duplex Stainless Steel Round Bar uses in Chemical Industry
» 2205 Duplex Stainless Steel Round Bar uses in Plumbing
» 2205 Duplex Stainless Steel Round Bar uses in Heating
» 2205 Duplex Stainless Steel Round Bar uses in Oil & Gas Industry
» 2205 Duplex Stainless Steel Round Bar uses in Water Supply Systems
» 2205 Duplex Stainless Steel Round Bar uses in Paper & Pulp Industry
» 2205 Duplex Stainless Steel Round Bar uses in Power Plant
» 2205 Duplex Stainless Steel Round Bar uses in Fabrication Industry
» 2205 Duplex Stainless Steel Round Bar uses in General purpose applications
» 2205 Duplex Stainless Steel Round Bar uses in Food Processing Industry
» 2205 Duplex Stainless Steel Round Bar uses in Structural Pipe
» 2205 Duplex Stainless Steel Round Bar uses in Heat Exchangers
» 2205 Duplex Stainless Steel Round Bar uses in also used for other industrial purpose etc.
Material Specification Chart of 2205 Stainless Steel Round Bar
| Stainless Steel Bar Length | 2 to 6 meters or 8 to 20 feet |
| SS Rod Chamfering | Available in 30, 45 & 60 degree thru fully automatic both-end chamfering machine |
| Ultrasonic Test of ASTM A276 Threaded Rod | As per ASTM A-388, EN 10308 (class 1 to 4), API 6A/ISO it is 100% tested thru Digital Ultrasonic Flaw Detector,10423:2003-PSL 3, MIL STD 2154, SEP 1920:1984 |
| SS Round Bar Size Tolerances | h11 |
| Tolerance of Cold Rolled SS Round Bar Length | Stock in special cut to length bar in tolerance – 0/+10mm (-0 +0.5 inch) |
| Surface Finish of Cold Rolled SS Bar | Cold drawn or Belt polished condition |
| Bar Heat Treatment | Annealed and Solution Annealed |
2205 Stainless Steel Round Bar Grade
| 300 Series Stainless Steel Grades | SS 303, 304, 304L, 309, 310, 316, 316L, 316H, 317, 317L, 321, 347,904L,2205 |
| 400 Series Stainless Steel Grades | 410, 410PSQ, 410QDT, 410HT, 416, 416HT, 416PSQ, 420 |
Various types of 2205 Stainless Steel Half Round Steel Bar:
Mirror polished finish stainless steel round bars
Mirror polished finish stainless steel round bar
2mm, 3mm, 6mm rod bars, ASTM A242 SS Round Steel Bars
2mm, 3mm, 6mm rod bar, ASTM A242 SS Round Steel Bar
14mm Stainless Steel Hot Rolled Round Bars
14mm Stainless Steel Hot Rolled Round Bar
stainless steel round bars 30mm diameter
stainless steel round bars 30mm diameter
10mm 16mm 18mm 20mm 25mm stainless steel Round rod bars
10mm 16mm 18mm 20mm 25mm stainless steel Round rod bar
Cold Rolled Stainless Round Bars from 5mm to 250mm diameter
Cold Rolled Stainless Steel Round Bar from 5mm to 250mm diameter
ASTM standard A564 hot rolled 120mm stainless round rod
ASTM standard A564 hot rolled 120mm stainless steel round rod
15mm stainless steel rod
15mm stainless steel rod
Stainless Steel Bright Round Bars
Stainless Steel Bright Round Bar
Surface Finish of A286 Round Bar
Surface Finish of A286 Round Bar 2205
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
2205 Stainless Steel Rod Condition
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
Size Chart of SS Hex Round Bar 2205
| Size (mm) | Weight (kg/m) | Size (mm) | Weight (kg/m) | Size (mm) | Weight (kg/m) |
| 7 x 7 | 0.337 | 19 x 19 | 2.479 | 38 x 38 | 9.916 |
| 8 x 8 | 0.44 | 20 x 20 | 2.747 | 40 x 40 | 10.988 |
| 9 x 9 | 0.556 | 21 x 21 | 3.029 | 42 x 42 | 12.114 |
| 10 x 10 | 0.687 | 22 x 22 | 3.324 | 45 x 45 | 13.906 |
| 11 x 11 | 0.831 | 24 x 24 | 3.956 | 48 x 48 | 15.822 |
| 12 x 12 | 0.989 | 25 x 25 | 4.292 | 50 x 50 | 17.168 |
| 13 x 13 | 1.161 | 26 x 26 | 4.642 | 53 x 53 | 19.29 |
| 14 x 14 | 1.346 | 28 x 28 | 5.384 | 55 x 55 | 20.774 |
| 15 x 15 | 1.545 | 30 x 30 | 6.181 | 60 x 60 | 24.723 |
| 16 x 16 | 1.758 | 32 x 32 | 7.032 | 65 x 65 | 29.015 |
| 17 x 17 | 1.985 | 34 x 34 | 7.939 | 70 x 70 | 33.65 |
| 18 x 18 | 2.225 | 36 x 36 | 8.9 | 75 x 75 | 38.629 |
2205 Stainless Steel Bars Sizes
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
| Cold Drawn and Polish | 3.00 - 75.00 | 1/8 - 3.00 | h8-h9-h10-h11 |
| Cold Drawn and Ground | 10.00 - 75.00 | 5/6 - 2.50 | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 - 150.00 | 1.50 - 6.00 | h11, h11-DIN 1013 |
| Peeled and Ground | 20.00 - 50.00 | 3/4 - 2.00 | h9-h10-h11 |
2205 Polished SS Flat Bar Size Chart
| sizes in mm | Size (inch) | Thickness (mm) | Thickness (in Inches) |
| 22 | 7/8 | 17 & 18 | 2/3 - 5/7 |
| 25 | 1 | 5 to 20 | 3/16 - 4/5 |
| 30 | 1-3/16 | 5 to 20 | 3/16 - 4/5 |
| 32 | 1-1/4 | 6 to 20 | 1/4 - 4/5 |
| 35 | 1-3/8 | 5 to 20 | 3/16 - 3/16 |
| 40 | 1-4/7 | 5 to 25 | 3/16 - 1 |
| 45 | 1-7/9 | 5 to 25 | 3/16 - 1 |
| 47 | 1-6/7 | 17,25 & 32 | 2/3, 1 & 1-1/4 |
| 50 | 2 | 5 to 32 | 3/16 - 1-1/4 |
| 55 | 2-1/16 | 5 to 25 | 3/16 - 1 |
| 57 | 2-1/4 | 32 | 1-1/4 |
| 60 | 2-3/8 | 5 to 35 | 3/16 - 1-3/8 |
| 63 | 2-1/2 | 10 to 30 | 3/8 - 1-3/16 |
| 65 | 2-5/9 | 10 to 30 & 35 | 3/8 - 1-3/16, & 1-3/8 |
| 70 | 2-3/4 | 6 to 25 & 40 | 1/4 - 1, & 1-4/7 |
| 75 | 3 | 8 to 25 | 5/16 - 1 |
| 80 | 3-1/8 | 8 to 20 | 5/16 - 4/5 |
| 90 | 3-1/2 | 8 to 20 | 5/16- 4/5 |
| 100 | 4 | 8, 10, 12 | 5/16, 3/8, 1/2 |
Sizes of Stainless Steel Square Bar 2205
| Size (mm) | Weight per metre (Kg) | Size (mm) | Weight per metre (Kg) |
| 12 x 12 | 1.14 | 30x30 | 7.11 |
| 16 x 16 | 2.02 | 40 x 40 | 12.60 |
| 20 x 20 | 3.16 | 50 x 50 | 19.80 |
| 25 x 25 | 4.94 |
|
|
Q1: Are you trading company or manufacturer ?
A1: We are professional manufacturer for many years. we can provide a wide range of steel products.
Q2: Will you delivery the goods on time?
A2: Yes,we promise to provide best quality products and delivery on time .Honesty is our company's tenet.
Q3: Do you provide samples ? is it free or extra ?
A3: The sample could can provide for customer with free,but the courier freight will be covered by customer account.
Q4: Do you accept the third party inspection?
A4: Yes absolutely we accept.
Q5: How can I get your quotation as soon as possible?
A5: You can contact us via email, message, wechat, WhatsApp and telephone.Please send us your requirement , we will work out a best price soon.