410 430 Stainless Steel Round Bar

Product Introduction

ASTM A276 Stainless Steel 410 430 Bar, UNS S41000 Bright Rod


The formation of martensite takes place on the rapid cooling of austenite, which was initially at a higher temperature. On rapid cooling, the microstructure of a martensitic alloy such as 410 Stainless Steel Round Bar looks like needles. As martensitic steel, this alloy undergoes heat treatment in order to become hardenable. The heat treatment used to harden the ASTM A276 Tp 410 Flat Bar is referred to as QT or quenching and tempering. It is because of the rapid cooling employed during quenching that makes it possible for the high temperature austenite to get converted to martensite. Two of the most vital characteristics of the alloy are that its hardness and toughness properties.

The ASTM A479 Type 410 Hex Bar also exhibits good corrosion resistance properties in combination with high strength. Unlike many austenitic stainless steel alloys, grade 410 Stainless Steel Rod is magnetic. Therefore this alloy could also be applied to those projects where magnetic behavior is required. The superior hardness, strength, and good toughness of the alloy are applied in the petroleum industry where the ASTM A276 Gr 410 Square Bar may be used in the refinery and in the various processing equipment in the petrochemical industry. The processing of sugar is another industry that benefits from the use of 410 Stainless Steel Bar Stock.


                             
                            
                      


410 STAINLESS STEEL ROUND BARS      410 STAINLESS STEEL SQUARE BARS       410 STAINLESS STEEL HEX BARS           410 STAINLESS STEEL FLAT BARS


Material Specification Chart of 410 Stainless Steel Round Bar

Stainless Steel Bar Length2 to 6 meters or 8 to 20 feet
SS Rod ChamferingAvailable in 30, 45 & 60 degree thru fully automatic both-end chamfering machine
Ultrasonic Test of ASTM A276 Threaded RodAs per ASTM A-388, EN 10308 (class 1 to 4), API 6A/ISO it is 100% tested thru Digital Ultrasonic Flaw Detector,10423:2003-PSL 3, MIL STD 2154, SEP 1920:1984
SS Round Bar Size Tolerancesh11
Tolerance of Cold Rolled SS Round Bar LengthStock in special cut to length bar in tolerance – 0/+10mm (-0 +0.5 inch)
Surface Finish of Cold Rolled SS BarCold drawn or Belt polished condition
Bar Heat TreatmentAnnealed and Solution Annealed


Chemical Structure of 410 SS Round Bar

ASTM GradeCarbonManganeseSiliconSulfurPhospherousChromiumNickelMolybdenumOther
3040.08 max2.00 max0.75 max0.030 max0.045 max18.0-20.08.0 11.0--
3160.08 max2.00 max0.75 max0.030 max0.045 max16.0-18.010.0 14.02.0 3.0-
317L0.035 max2.00 max0.75 max0.030 max0.045 max18.0-20.011.0 14.03.0 4.0-
310 S0.08 max2.00 max1.5 max0.030 max0.045 max24.0-26.019.0 22.03.0 4.0-
347 H0.04 0.102.00 max0.75 max0.030 max0.045 max17.0- 19.09.0 13.0-10C(Cb+Ta)<1.10%
3210.082.00 max0.75 max0.030 max0.045 max17.0-20.09.0 12.0-5C 0.70%


410 Stainless Steel Round Bar Grade

300 Series Stainless Steel GradesSS 303, 304, 304L, 309, 310, 316, 316L, 316H, 317, 317L, 321, 347
400 Series Stainless Steel Grades410, 410PSQ, 410QDT, 410HT, 416, 416HT, 416PSQ, 420


Various types of 410 Stainless Steel Half Round Steel Bar:


Mirror polished finish stainless steel round bars

Mirror polished finish stainless steel round bar

2mm, 3mm, 6mm rod bars, ASTM A242 SS Round Steel Bars

2mm, 3mm, 6mm rod bar, ASTM A242 SS Round Steel Bar

14mm Stainless Steel Hot Rolled Round Bars

14mm Stainless Steel Hot Rolled Round Bar

stainless steel round bars 30mm diameter

stainless steel round bars 30mm diameter

10mm 16mm 18mm 20mm 25mm stainless steel Round rod bars

10mm 16mm 18mm 20mm 25mm stainless steel Round rod bar

Cold Rolled Stainless Round Bars from 5mm to 250mm diameter

Cold Rolled Stainless Steel Round Bar from 5mm to 250mm diameter

ASTM standard A564 hot rolled 120mm stainless round rod

ASTM standard A564 hot rolled 120mm stainless steel round rod

15mm stainless steel rod

15mm stainless steel rod

Stainless Steel Bright Round Bars

Stainless Steel Bright Round Bar

Surface Finish of A286 Round Bar


Surface Finish of A286 Round Bar 410

CDCold drawnPPolished
BDBright drawnSRESlit rolled edge
CGCentreless groundHFHot finished
CFCold finishedHRAPHot rolled annealed and pickled
P&TPeeled and turnedRTRough turned/peeled
STSmooth turnedPRPeeled and reeled


410 Stainless Steel Rod Condition

H&THardened and tempered.
ANNAnnealed
PHPrecipitation hardened.

Size Chart of SS Hex Round Bar 410

Size (mm)Weight (kg/m)Size (mm)Weight (kg/m)Size (mm)Weight (kg/m)
7 x 70.33719 x 192.47938 x 389.916
8 x 80.4420 x 202.74740 x 4010.988
9 x 90.55621 x 213.02942 x 4212.114
10 x 100.68722 x 223.32445 x 4513.906
11 x 110.83124 x 243.95648 x 4815.822
12 x 120.98925 x 254.29250 x 5017.168
13 x 131.16126 x 264.64253 x 5319.29
14 x 141.34628 x 285.38455 x 5520.774
15 x 151.54530 x 306.18160 x 6024.723
16 x 161.75832 x 327.03265 x 6529.015
17 x 171.98534 x 347.93970 x 7033.65
18 x 182.22536 x 368.975 x 7538.629


410 Stainless Steel Bars Sizes

TypeSIZES (mm)SIZES (Inches)ISO Tolerance
Cold Drawn and Polish3.00 - 75.001/8 - 3.00h8-h9-h10-h11
Cold Drawn and Ground10.00 - 75.005/6 - 2.50h8-h9-h10-h11
Peeled and Polished40.00 - 150.001.50 - 6.00h11, h11-DIN 1013
Peeled and Ground20.00 - 50.003/4 - 2.00h9-h10-h11


410 SS Hex Bar Standard lengths of 2000 mm up to 6000 mm. 

Cut to size on request (tolerance +2/-0 mm).

5.045.0
6.050.0
7.055.0
8.060.0
9.065.0
10.070.0
12.075.0
16.080.0
20.090.0
25.0100.0
30.0130.0
35.0160.0
40.0200.0


410 Polished SS Flat Bar Size Chart

sizes in mmSize (inch)Thickness (mm)Thickness (in Inches)
227/817 & 182/3 - 5/7
2515 to 203/16 - 4/5
301-3/165 to 203/16 - 4/5
321-1/46 to 201/4 - 4/5
351-3/85 to 203/16 - 3/16
401-4/75 to 253/16 - 1
451-7/95 to 253/16 - 1
471-6/717,25 & 322/3, 1 & 1-1/4
5025 to 323/16 - 1-1/4
552-1/165 to 253/16 - 1
572-1/4321-1/4
602-3/85 to 353/16 - 1-3/8
632-1/210 to 303/8 - 1-3/16
652-5/910 to 30 & 353/8 - 1-3/16, & 1-3/8
702-3/46 to 25 & 401/4 - 1, & 1-4/7
7538 to 255/16 - 1
803-1/88 to 205/16 - 4/5
903-1/28 to 205/16- 4/5
10048, 10, 125/16, 3/8, 1/2


Sizes of Stainless Steel Square Bar 410

Size (mm)Weight per metre (Kg)Size (mm)Weight per metre (Kg)
12 x 121.1430x307.11
16 x 162.0240 x 4012.60
20 x 203.1650 x 5019.80
25 x 254.94

Equivalent of 410 SS Bar

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
SS 4101.4006S41000SUS 410––––


Mechanical Properties of ASME SA479 Stainless Steel 410 Round Bars

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation


MPa – 480MPa – 275





Q1: Are you trading company or manufacturer ?

A1: We are professional manufacturer for many years. we can provide a wide range of steel products. 


Q2: Will you delivery the goods on time? 

A2: Yes,we promise to provide best quality products and delivery on time .Honesty is our company's tenet. 


Q3: Do you provide samples ? is it free or extra ? 

A3: The sample could can provide for customer with free,but the courier freight will be covered by customer account. 


Q4: Do you accept the third party inspection? 

A4: Yes absolutely we accept. 


Q5: How can I get your quotation as soon as possible? 

A5: You can contact us via email, message, wechat, WhatsApp and telephone.Please send us your requirement , we will work out a best price soon.

Get A Free Quote
NameRequiredNameWrong Format
PhoneRequiredPhoneWrong Format
EmailRequiredEmailWrong Format
MessageRequired
Recommended Products
TISCO Stainless Steel Product Group Co., Ltd.