UNS S30815 253MA Dual Phase Steel Coil

Product Introduction
INTRODUCTION

● UNS S30815 253MA Dual Phase Steel Coil


1) UNS S30815 253MA Dual Phase Steel Coil  is a heat-resistant austenitic stainless steel.

2) UNS S30815 253MA Dual Phase Steel Coil is a heat-resistant austenitic stainless steel for applications requiring high creep strength and good corrosion resistance. 

    Temperature range 850~1100 ℃ application.

3) The chemical composition of UNS S30815 253MA Dual Phase Steel Coil is balanced, so that the steel has suitable comprehensive properties in the temperature range of 850℃-1100℃, 

    extremely high oxidation resistance, and the scale temperature is as high as 1150℃; extremely high creep resistance and deformation resistance. Creep rupture strength.

4) UNS S30815 253MA Dual Phase Steel Coil has Good high temperature corrosion resistance and balanced brush corrosion resistance in most gaseous media;

    high yield strength and tensile strength at high temperatures; 

5)  UNS S30815 253MA Dual Phase Steel Coil good formability and weldability, and sufficient machinability .


● UNS S30815 253MA Dual Phase Steel Coil Application areas:


253MA Dual Phase Steel Coil is widely used in sintering equipment, blast furnace equipment, steel melting, furnace and continuous casting equipment, rolling mill (heating furnace), heat treatment furnace and accessories, mineral equipment and cement production equipment.

253MA Dual Phase Steel Coil can be used in pressure-bearing occasions up to 900 ℃ and non-pressure-bearing high-temperature parts with working temperature up to 1150 ℃.


PRODUCT DESCRIPTION

ProductUNS S30815 253MA Dual Phase Steel Coil
Surface FinishBA, 2B, 4K, 6K, 8K, NO.4, HL, Embossed, Perforated, Pickling white, Polished outside, Polished inside and outside.
TechniqueHot Rolled / Cold Rolled
StandardAISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc
Width500mm/1000mm/1219mm/1250mm/1500mm/1800mm/2000mm/2200mm/2500mm/3000mm/3500mm, or as required
Length500mm/1000mm/2000mm/2438mm/2500mm/3000mm/6000mm/8000mm—13000mm, or as required
Thickness0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/2.0/2.5/3.0/4.0/5.0/6.0/8.0/10.0/12.0/14.0/16.0—250mm, or as required
Material201, 202301, 302, 303, 303F, 303Cu, 304, 304L, 304H, 304F, 314321, 316, 316L, 316Ti, 316F, 316LTi, 309S, 310, 310S, 904L409, 410, 416, 420, 430, 430F, 431, 436, 439, 441  317, 317L, 347H, 329, 630, 631, 17-4PH2205, 2507, 2304, HASTELLOYC-276, C-22, C-2000, MONEL400, 254SMO, 253MA, Inconel1600,  Inconel1625Incoloy800, Incoloy800H, Incoloy825, Incoloy800HT    GH3030, GH3039, GH2747
ColorStandard RAL color: Red, Blue, White, Grey, Brick, etc.
Stock Dimension

Cold Rolled Sheet : 0.4-6.0mm*1000*2000mm/ 1220*2440mm/ 1250*2500mm/ 1500*3000mm, or as your request;

Hot Rolled Plate : 3.0-200.0mm*1250*2500mm/ 1500*3000mm/ 1500*6000mm/ 1800*6000mm/ 2000*6000mm, or as your request;

Thick Sheet : 6.0mm-200mm *width*length,  as your request;

Mirror Surface : 0.4-3.0mm*1000*2000mm/ 1219*2438mm and other customize size workable;

Hairline Surface : 0.4-3.0mm*1000*2000mm/ 1219*2438mm and other customize size workable;

Color Coating : 0.4-3.0mm*1000*2000mm/ 1219*2438mm and other customize size workable;

Sandblasting : 0.4-3.0mm*1000*2000mm/ 1219*2438mm and other customize size workable;

ServiceOEM, Customized processing service, Customized fabrication by drawings;
Processing TypeCutting, Bending, Stamping, Welding, CNC machining;
Cutting TypeLaser cutting; Water-jet cutting; Flame cutting;
ProtectionInter paper available;   PVC protecting film available;
ApplicationCostruction Industry/ Kichten Products/ Fabrication Industry/ Home Decoration;

UNS S30815 253MA Stainless Steel COIL COMPOSITION CONTENT

GradeCMnPSSiCrNiMoNCe
S308150.05-0.10≤0.8≤0.04≤0.031.40-2.020.0-22.010-12

-

0.14-0.200.03-0.08


UNS S30815 253MA Stainless Steel COIL EQUIVALENT GRADES

Commonly NameChinese standardASIMUNSENForging standard A182
254Ma-
S30815S308151.4835F45


UNS S30815 253MA Stainless Steel COIL Plate SURFACE FINISH

SurfaceCharacteristicProcessing Technology.
N0.1OriginalPickled after hot rolling.
2DBluntHot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2BBlurredHot rolling + annealing shot peening pickling + cold rolling + annealing pickling + tempering rolling.
N0.3MattePolishing and tempering rolling with 100-120 mesh abrasive materials.
N0.4MattePolishing and tempering rolling with 150-180 mesh abrasive material.
NO.240MattePolishing and tempering rolling with 240 mesh abrasive materials.
NO.320MattePolishing and tempering rolling with 320 mesh abrasive materials.
NO.400MattePolishing and tempering rolling with 400 mesh abrasive materials.
HLBrushedGrind the surface of the steel belt with an appropriate grinding grain size to make it show a certain longitudinal texture.
BABrightThe surface is annealed and shows high reflectivity.
6KMirrorRough grinding and polishing.
8KMirrorFine grinding and polishing



OUR FACTORY

We have imported equipment, 20,000 tons of inventory, professional masters, and a clean environment. Customer satisfaction is the basis of our service. If you need stainless steel materials, please contact our professional sales as soon as possible. They will give you the fastest. We make the most professional and reasonable quotation at the speed of our company, and look forward to our long-term cooperation as soon as possible.

  

OUR EQUIPMENT

We have all kinds of board production equipment, you can meet your various needs.


OUR ADVANTAGE

1. Wide Specifications Range;

2. Pure steel chemical composition;

3. Outstanding mechanical properties;

4. Good performance after welding;

5. Good shape and high precision;

6. Excellent corrosion-resistant and long service life.


APPLICATION

Stainless Steel Sheet are widely used in below fields:

1.Construction field, shipping building industry;

2.Petroleum and Chemical Industries;

3.Food and Mechanical Industries;

4.Boiler Heat Exchange;

5.Machinery and Hardware Industries.


PACKING

1. Sheets covered with wooden plate for protection in transportation;

2. All sheets will be loaded in strong wooden packages;

3. Every cartons loaded with good shoring and strengthening;

4. Take container loading pictures and seal the container;

5. Transportation speed is quick. And keep customer each step informed.

Get A Free Quote
NameRequiredNameWrong Format
PhoneRequiredPhoneWrong Format
EmailRequiredEmailWrong Format
MessageRequired
Recommended Products
TISCO Stainless Steel Product Group Co., Ltd.